How to solve the problem of network jam on the treadmill digital T-shirt printing machine

by:angelacrox     2021-08-19
Whether it is machine printing or hand printing, the water-based glue used in the T-shirt printing machine is more or less clogged to varying degrees. If the degree is slight, the impact will be minor and no serious problem; if the degree is serious, the only way to replace the slurry of the treadmill digital printing machine is usually. In response to this situation, some add more water to the slurry of the treadmill digital T-shirt printing machine, and some add a little slow-drying agent. Of course, this also has a certain effect. I personally think that although it is more convenient to add water, it will become more astringent during the operation. If you add urea, it is not environmentally friendly. So, how to solve the problem of the network jam of the treadmill digital printing machine? You can add some cooking oil when adding water, generally no more than 2% is no problem, but after adding the oil, the luster of the treadmill digital T-shirt printing machine glue It will also improve, not suitable for matte printing. In order to find a more effective method, I have tried to wipe the screen version of the treadmill digital printing machine with grease-such as petroleum jelly, edible oil, silicone oil (silicone oil is the best) before printing, not just To wipe the pattern part of the pattern, wipe the entire layout of the treadmill digital T-shirt printing machine, and then blow it with a hot air cylinder. The function is to let the grease penetrate the omentum and mesh, and the printing plate will be much smoother. In addition, the screen printing of the treadmill digital printing machine is much more convenient after printing, and it will be cleaned by flushing with water. If you find that the screen is jammed during the printing process of the treadmill digital T-shirt printing machine, people are usually used to gently rubbing the jammed place with their hands. In fact, it is just a futile effort. On the contrary, the treadmill digital printing machine screen becomes more jammed. Some people clean the screen and reprint it. My suggestion is to scrape the slurry of the treadmill digital T-shirt printing machine to one side of the screen, exposing the stuffed place. Take a piece of wet cloth in each hand and clamp the stuffed place on the upper and lower positions of the screen. Wipe it back and forth a few times. It is solved, and then the paste scraped aside is covered on the text pattern part of the screen of the treadmill digital printing machine, and the scratch printing is started. Generally, there is no problem. When I used the previously used treadmill digital printing machine screen again, it was found that some places were clogged, and it was not clean with the washing water. How to deal with this situation? You can find a sewing needle, use the tip of the needle to scrape the plugged place a few times, and then wipe it a few times with a cotton cloth.
Custom message
Chat Online
Chat Online
Chat Online inputting...