Maintenance of the core components of the treadmill digital printing machine
The print head of the digital printing machine, the new ink tank should not be placed in direct sunlight and dusty places, and the storage temperature should be 10℃-35℃ to avoid ink freezing and change. Since the smaller the nozzle of the inkjet printer, the higher the resolution. At the same time, the smaller the nozzle, the higher the requirements for ink quality. Therefore, you should try to use the ink provided by the manufacturer of the treadmill digital T-shirt printing machine, and avoid choosing inferior ink. Second, the maintenance of the print head cleaning and sealing device The print head cleaning and sealing device is an important component of the print head of the treadmill digital printing machine, especially the cleaning and sealing device for separating the print head is more complicated. The whole device is installed at the leftmost end of the print head moving slide, which is the protection position or initial position of the print head. The device is composed of a scraper, a wiper, and a shield with aspirator. The device mainly completes the four actions of'scratching, wiping, covering and sucking' to maintain the print head of the treadmill digital T-shirt printing machine and ensure its normal operation. 3. Inkjet head cleaning system failure. Under normal circumstances, the inkjet head will move to the nozzle cleaning unit to execute the automatic nozzle cleaning procedure after turning on the treadmill digital printing machine, and the ink suction mechanism in the inkjet head cleaning system will start The nozzle is absorbed and cleaned. After cleaning, the nozzle is sealed by the sealing rubber part on the nozzle frame to ensure the cleaning of the inkjet head of the treadmill digital T-shirt printing machine. When the inkjet head cleaning system fails, the nozzle makes an error during the cleaning process.