Maintenance Skills and Experiences of Pure Cotton Digital Direct Jet T-shirt Printing Machine
T-shirt printing machines are very sophisticated equipment. The maintenance of all-cotton digital direct-injection garment printing machines is generally taught by T-shirt printing machine manufacturers. The maintenance in the manual is only simple nozzle maintenance and transmission parts. Lubrication and maintenance, coupled with the relative lack of information on this aspect on the Internet, Yanyan’s editor will introduce the maintenance experience of the cotton digital direct-injection garment printing machine after a period of time: 1. Try to use a shorter one. Everyone hopes that the speed of high-quality USB digital direct-injection T-shirt printing machine is as fast as possible. The printing machine basically uses the USB interface, so that the normal printing speed can generally be guaranteed. The printing speed of the digital direct-injection garment printing machine is related to the quality and length of the data line. Therefore, when conditions permit, it is recommended that customers try to use a better quality and shorter data line. For some materials that do not have strict requirements, you can increase the speed by setting the printing accuracy. 2. To prevent the print head from drying up. For some nozzles that are blocked due to the drying of the print head, we can first soak a clean cotton cloth and place it next to the print head, because it will naturally evaporate moisture and the nearby air will be saturated with moisture, which can make the digital The ink of the nozzle of the direct jet T-shirt printing machine will not dry up so easily. 3. The placement of the digital direct-injection garment printing machine must be placed on a stable ground to work, and do not place any objects on the printing machine platform. When using the digital direct-injection T-shirt printing machine, the front cover must be closed to prevent dust from entering the machine or other hard objects hindering the movement of the printer carriage. Also note that it is prohibited to plug and unplug the printer cable when powered, because doing so may damage the print port of the digital direct-injection garment printing machine and the parallel port of the PC, and even more seriously, it may even damage the main board of the PC. 4. Ensure that the surrounding environment is clean. If the operating environment of the digital direct-injection T-shirt printing machine is in a dusty place, it is easy to cause poor lubrication of the carriage guide shaft, and block the movement of the print head during the printing process, which may cause the printing position Inaccuracy or impact on the mechanical frame causes damage and downtime of the digital direct-injection garment printing machine. The user should frequently wipe off the dust on the guide shaft, lubricate the guide shaft, and choose a lubricant with good fluidity. 5. Precautions for power on and off Before shutting down, the user should confirm whether the print head of the digital direct-injection T-shirt printing machine has returned to the initial position. This is to avoid waste of ink by cleaning the print head again when the printing machine is turned on next time. Second, because the print head can be sealed by the protective cover at the initial position, the print head will not be clogged so easily. A part of the digital direct-injection garment printing machine print head will be locked when it is in the initial position. Even if we move the print head by hand, we cannot make it leave the initial position. It is important to note here, do not forcefully move the print head, otherwise it will cause damage to the mechanical parts of the digital direct-injection T-shirt printing machine.