Market analysis of ink for digital direct-injection T-shirt printing machine and heat press machine
The ink market for T-shirt printing machines. The digital direct-injection garment printing machine paint ink not only adopts the method of digital printing, restrains the traditional printing and dyeing chromatism, the limitation of the flower back, but also simplifies the cumbersome printing process, and provides the enemies of the vast printing and dyeing industry. It is the best choice to fully connect with the original consumption equipment and processes, and greatly reduce the energy consumption of the enterprise. It can be used in all practical digital direct-injection T-shirt printing machines with piezoelectric nozzles in the market. It has a complete water chromatogram and a wide color gamut; it is environmentally friendly, has good volatility, and eliminates dye hydrolysis; the ink has the characteristics of high fluency, high color saturation, and safety to the nozzle. The paint ink of digital direct-injection garment printer is mainly used for digital printing on cotton, linen, viscose fiber and silk fabrics, and can be used for digital printing on textiles, natural cotton, silk fabrics, wool fabrics and other natural fiber fabrics. Ribbon digital printing machine ink practical fabric fibers include: pure cotton, hemp, natural cotton, MODEL, bamboo fiber, TENCEL, etc.; used for printing on silk, wool, cashmere and other fiber fabrics. UV curing transfer printing method: it is the so-called flat heat transfer T-shirt printing machine. In recent years, many patents have reported coating UV curing transfer printing, which has become a hot spot in transfer printing. It was once mature. Prepare a UV curable resin, apply it to the substrate material, stop drying at 100°C for 20 seconds to form a UV radiation curable coating, print when the coating is long, and then stop UV radiation curing. The coating on the unprinted area is cured, and the printed area is obstructed by the printing layer, and the UV is not transparent. The coating on the bottom is not cured, and then the substrate and the fabric are stacked together to stop the heating and transfer, usually 120-130, In 20 seconds, 40 psi, the printing ink at the printing place is transferred to the fabric, and the UV radiation curing is stopped at first to make it permanent markings.