Solution to the rubbing problem of digital T-shirt printer
T-shirt printing machine rubs the paper when printing. Although this is a minor problem, if it is not handled properly, it will affect the printing quality. Here, Yanyan’s editor will analyze the solution to the rubbing problem of the digital T-shirt printer. Nowadays, most advertising shops or other occupations use T-shirt printers, because T-shirt printers have gradually entered the domestic market due to the advantages and stability of their quotations. Regarding the printing rubbing paper encountered during the operation of the T-shirt printer, the factors are summarized as follows: 1. The picture is offset, and there are two situations in which the picture is offset. One is that the grating may be dirty or broken, and the second factor may be The servo motor of the T-shirt printing machine is broken. 2. The copper sleeve is loose. Maybe the guide rail of the T-shirt printer is relatively astringent. It is recommended to add some oil to lubricate it. If it still does not work, fix the copper sleeve with glass glue so that it will not fall off. 3. The height of the trolley is too low, and the distance between the trolley plate and the paper is too small. If the paper rubs against the paper, the height of the t-shirt printing machine trolley should be lowered, and the height of a coin is moderate. Basically, after checking the above three items, the problem of transfer paper rubbing paper when printing on T-shirt printer will be smoothly dealt with. At the same time, there is also a reminder. If the picture is printed off, you can check and wipe off the grating, or check the servo motor, and check It is very important to keep the T-shirt printing machine clean if there is any looseness when the belt is moving.