The difference between clothing direct injection machine and printing lift board

by:angelacrox     2021-08-20
In the production of clothing direct spray machine, whether workers or experienced production, just press down the screen frame, the positioning block will fall into the positioning mechanism (adjust the machine to the normal accuracy requirement, observe with eyes, the positioning of the positioning block on both sides when it falls into the card seat Bearings are rolling at the same time), the position of the screen must be accurate, even if it is shaken by hand, the movement of the screen will not exceed 0.2mm. Although the positioning methods of the printing plate are different, the current trend is to use 'backer' positioning as the main method. Its positioning accuracy is affected by two aspects. One is that the screen adopts three-point positioning, that is, two points horizontally and one point vertically. First of all, it is difficult for the three positioning points on several screen frames to be completely consistent. Secondly, the positioning 'backerFast, not a skilled worker. But no matter how skilled workers are, there will always be negligence. Therefore, the plate-lifting printing is affected by these two subjective and objective factors, and the defective rate (caused by the color registration) is much higher than that of the clothing direct-injection machine, especially the high-precision printing. 2. Save plant area. A clothing direct spraying machine covers an area of u200bu200bonly 5-9 square meters, a manual machine has a diameter of 2.2 to 2.5m, and an automatic clothing direct spraying machine has a diameter of only 3 to 3.5m. 3. The printing of ready-made garments (finished products) is conducive to the continuous production of garment manufacturers, eliminates all kinds of troubles caused by interrupting the flow of garment printing, and helps reduce costs. 4. The labor intensity is relatively greatly reduced. The printing workers must carry the screen to move around and shift the printing. The labor intensity is quite heavy. The northern part is vividly called the 'running versionWorkers do not need to end the plate during the production of the clothing direct spray machine, only need to gently press down and lift the screen support arm. 5. Especially suitable for commercial production. The operation of clothes and all kinds of children's casual wear must adapt to market demand, and their printing patterns must be produced according to market sales.
Custom message
Chat Online
Chat Online
Chat Online inputting...