What should I do if the sublimation cloth digital printing machine rubs the paper?
When the digital printing machine is used to output pictures, sometimes the cloth printing machine will rub the paper during printing. Although this is a small fault, it will affect the printing quality if it is not handled properly. Here, the Yanyan editor will analyze this with you The cause and solution of the failure. Now most of the cloth digital printing machines used in advertising shops, clothing printing or other industries have gradually entered the domestic market due to their price advantages and stability. The reasons for printing rubbing paper encountered during the operation of the cloth digital printing machine are summarized as follows: 1. The image is offset, and there are two situations where the image is offset from the left and the right. One is that the grating is dirty or broken, and the second reason is The servo motor of the cloth printing machine may be broken. 2. If the copper sleeve is loose, or the guide rail is astringent, it is recommended to add some oil to lubricate it. If it still does not work, fix the copper sleeve with glass glue so that it will not fall off. 3. The height of the trolley is too low, and the distance between the trolley board and the paper is too small. If the paper rubs against the paper, adjust the height of the cloth digital printing machine trolley. The height of about a coin is moderate. Basically, by checking the above three items, the problem of the transfer paper rubbing against the paper during the printing of the cloth digital printing machine will be solved smoothly. At the same time, the editor of Yanyan also reminded that if the drawing is off the track, you can check and wipe off the grating, or check the servo motor, and check whether there is any looseness when the belt is moving. It is very important to keep the cloth printing machine clean.