Leather printer flying ink for this problem. 1. Static electricity is the number one killer of flying ink. Since the ink droplets ejected from the nozzle are very small, once static electricity is generated on the machine, the gravitational force of static electricity can easily change the direction of the ink droplets, so ink flying will occur. There are two ways to check whether the leather printer has static electricity. One is to check whether the leather printer is grounded, and the other is to check the indoor air humidity. The air humidity is too low. Even if the leather printer is grounded, there will be static electricity. A humidifier can be used to adjust the indoor humidity. , Can also add anti-static facilities to the leather printer. 2. The nozzle is clogged. When the nozzle is partially clogged, it will also cause ink flying. You can check the status of the nozzle by typing a test strip, and then remove the nozzle. 3. When the wind blows, check whether there is an air conditioner or a fan blowing towards the leather printer. The flowing air will also change the direction of the ink droplets. Also, check the doors and windows. The faster indoor air flow will also change the direction of the ink droplets. Through the above three-step inspection, the problem of ink flying in the leather printer can basically be eliminated.